UNIAUD, EPOX EP8KDA3J (nforce3)

New and unsorted messages / Новые и неотсортированные сообщения
User avatar
Eugene Gorbunoff
Site Admin
Posts: 685
Joined: Sat Apr 09, 2005 11:18
Location: St.Petersburg, Russia

UNIAUD, EPOX EP8KDA3J (nforce3)

Postby Eugene Gorbunoff » Sun Dec 26, 2010 16:13

From: Karl.Steinsky
Date: 2010/12

source: http://news.ecomstation.nl/article.php? ... tall#24468

Code: Select all

Hardware: -mainboard = EPOX EP8KDA3J including chip nforce3
          -processor: AMD Athlon64 3200 (one core)
          -SCSI-controller PCI ultra Dawi-Control D
          -Ethernet Adapter Card Dlink DFE-530TX (chip VIA VT6105)

Software: -Kernel SMB IBM: 14.104a
          -Config.Sys PSD=ACPI.PSD  (no switches)

User avatar
Eugene Gorbunoff
Site Admin
Posts: 685
Joined: Sat Apr 09, 2005 11:18
Location: St.Petersburg, Russia

Re: UNIAUD, EPOX EP8KDA3J (nforce3)

Postby Eugene Gorbunoff » Sun Dec 26, 2010 16:15

e-co:

Did you checked your system? Are there IRQ conflicts?
Configuring ACPI driver for eComStation 2.0
http://ecomstation.ru/showarticle.php?id=233

Code: Select all

RMVIEW: Physical view
  IRQ Level =  0  PCI Pin = NONE  Flg = EXCLUSIVE    TIMER_CH_0

  IRQ Level =  1  PCI Pin = NONE  Flg = EXCLUSIVE    KBD_0 Keyboard Controller

  IRQ Level =  2  PCI Pin = NONE  Flg = EXCLUSIVE    PIC_1

  IRQ Level =  5  PCI Pin = A     Flg = SHARED       OHCI Compliant USB Host Controller

  IRQ Level =  5  PCI Pin = B     Flg = SHARED       OHCI Compliant USB Host Controller

  IRQ Level =  5  PCI Pin = C     Flg = SHARED       EHCI Compliant USB Host Controller

  IRQ Level =  6  PCI Pin = NONE  Flg = MULTIPLEXED  FLOPPY_0 Floppy Controller

  IRQ Level =  8  PCI Pin = NONE  Flg = EXCLUSIVE    RTC

  IRQ Level =  9  PCI Pin = NONE  Flg = SHARED       ACPI Interface
  IRQ Level = 11  PCI Pin = A     Flg = SHARED       NVETH_0 NVIDIA nForce3 Network Adapter
  IRQ Level = 11  PCI Pin = A     Flg = SHARED       NVidia CK8S with Realtek ALC850 rev 0
  IRQ Level = 12  PCI Pin = NONE  Flg = SHARED       AUX_0 PS/2 Auxiliary Device Controller
  IRQ Level = 14  PCI Pin = NONE  Flg = EXCLUSIVE    IDE_0 xATA Controller
  IRQ Level = 15  PCI Pin = NONE  Flg = EXCLUSIVE    IDE_1 xATA Controller
  IRQ Level = 44  PCI Pin = NONE  Flg = EXCLUSIVE    ACPI Interface
  IRQ Level = 45  PCI Pin = NONE  Flg = EXCLUSIVE    ACPI Interface
  IRQ Level = 46  PCI Pin = NONE  Flg = EXCLUSIVE    ACPI Interface
  IRQ Level = 47  PCI Pin = NONE  Flg = EXCLUSIVE    ACPI Interface



e-co:

I don't know how to fix your problem. Too many devices + SCSI ..

I would recommend:
* remove SCSI
* try boot in SMP APIC mode

or
* keep scsi
* disable half of devices (audio, usb, ..)


Return to “Служба поддержки / Support service”

Who is online

Users browsing this forum: No registered users and 2 guests

cron