Need ACPI to Leave my network card alone..

Discussion of ACPI driver (Power management, multi-processor support, PnP)
joevella
Posts: 3
Joined: Sat Apr 12, 2008 06:34

Need ACPI to Leave my network card alone..

Postby joevella » Sat Apr 12, 2008 06:46

I need ACPI to leave my network card alone.
With 2.22 it comes up in low IRQs so I can use the netflx3 driver and all is good.
with 3.08 it reassigns them to high IRQs and the driver loads but says the irq's are invalid and fails.
I mapped the irq's to low IRQ's in the ACIPD.cfg, the driver loads but won't function.
Can someone point me the right direction to keep ACPI from changeing the IRQ's for the network card - or write/patch a netflx3 driver ( tlan ) - that will accept the high IRQ's :) thanks.
Joseph Vella

Ecs2.0b4 M2nPV-VM AMD dualcore /APIC .. no !nod required..

User avatar
Eugene Gorbunoff
Site Admin
Posts: 685
Joined: Sat Apr 09, 2005 11:18
Location: St.Petersburg, Russia

Re: Need ACPI to Leave my network card alone..

Postby Eugene Gorbunoff » Sat Apr 12, 2008 10:33

Please post the ticket to the ACPI tracker

http://ecomstation.ru/projects/acpitools/?action=logs

joevella
Posts: 3
Joined: Sat Apr 12, 2008 06:34

Re: Need ACPI to Leave my network card alone..

Postby joevella » Sat Apr 12, 2008 16:57

I have created a ticket, but no logs. I'll try to put the card back in and get you a log with the redirection and without.
Is there another way to do it, other than mapping the irq's back to low irq's ??
Joseph Vella

Ecs2.0b4 M2nPV-VM AMD dualcore /APIC .. no !nod required..

joevella
Posts: 3
Joined: Sat Apr 12, 2008 06:34

Re: Need ACPI to Leave my network card alone..

Postby joevella » Sun Apr 13, 2008 18:30

I have posted logs, with and without /!nod ...
Joseph Vella

Ecs2.0b4 M2nPV-VM AMD dualcore /APIC .. no !nod required..


Return to “ACPI for eComStation”

Who is online

Users browsing this forum: No registered users and 1 guest

cron