ACPI 3.00 -- hang at bootl ogo

Discussion of ACPI driver (Power management, multi-processor support, PnP)
Alan Beagley
Posts: 67
Joined: Wed Jul 26, 2006 02:06

ACPI 3.00 -- hang at bootl ogo

Postby Alan Beagley » Thu Aug 09, 2007 15:40

My Dual-core AMD system (Asus A8N-E motherboard -- nVidia chipset) works fine with ACPI 2.22 and eCS 2.0RC1. Video card is ATI X1050 (PCI-Express). Hard disks are SCSI attached to Adaptec AHA-29160. IRQs 3,5 and 7 are Reserved in the mobo BIOS.

PSD=ACPI.PSD /SMP /TMR /APIC

I updated the Dani driver (needed by ATAPI DVD burner) and installed ACPI 3.00 using the .WPI file. I also replaced the older APM.ADD driver by the latest one.

Now the machine either hangs at the boot logo or traps in module ACPI.

Was I supposed to use the experimental kernel instead of 104a?

And what about the new /ALS switch?
Alan

User avatar
Eugene Gorbunoff
Site Admin
Posts: 685
Joined: Sat Apr 09, 2005 11:18
Location: St.Petersburg, Russia

Postby Eugene Gorbunoff » Thu Aug 09, 2007 17:22

OK, please create the ticket here:
http://svn.netlabs.org/acpi/newticket

* "Danis506 v1.8.0 seems to
have a showstopper-bug with SiliconImage SATA controllers.", maybe this is a problem..
* try /ALS


Return to “ACPI for eComStation”

Who is online

Users browsing this forum: No registered users and 2 guests

cron