TermoShow.exe

Discussion of ACPI driver (Power management, multi-processor support, PnP)
User avatar
Gabriele
Posts: 98
Joined: Tue Mar 21, 2006 21:47

TermoShow.exe

Postby Gabriele » Thu May 18, 2006 18:12

Hi all,

TermoShow.exe does nothing here:

0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27
0.0 0.0 0.0 0.0 18.05.2006 17:06:27

pci.exe log follows:

Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 573 of this file; 10-10-2005 (D-M-Y)."

PCI BIOS Version 2.10 found!
Number of PCI Busses : 8
PCI Characteristics : Config Mechanism 1

Searching for PCI Devices using the OEMHLP$ driver

Bus 0 (PCI Express), Device Number 0, Device Function 0
Vendor 8086h Intel Corporation
Device 2590h 82915PM/GM/GMS, 82910GML Host Bridge
Command 0106h (Memory Access, BusMaster, System Errors)
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
Received Master Abort, Fast Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
New Capabilities List Present:
Vendor-Dependant Capability

Bus 0 (PCI Express), Device Number 1, Device Function 0
Vendor 8086h Intel Corporation
Device 2591h 82915PM/GM PCI Express Graphics Port
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 03h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID FF031179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
System IRQ 10, INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
Secondary Bus Command 000Ch (ISA mapping, VGA mapping)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit)
Memory Range Passed to Secondary Bus : C0100000h..C01FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : D0000000h..D7FFFFFFh
New Capabilities List Present:
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1179h
SSID : FF03h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x16
Link Port Number : 2
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x16
Slot Capabilities :
Slot Power Limit Value : 4.000 Watts
Physical slot Number 0

Bus 0 (PCI Express), Device Number 28, Device Function 0
Vendor 8086h Intel Corporation
Device 2660h 82801FB ICH6 PCI Express Root Port 1
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 03h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to PCI
System IRQ 10, INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
Secondary Bus Command 0004h (ISA mapping)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : 4000h..4FFFh (16-bit)
Memory Range Passed to Secondary Bus : C4000000h..C7FFFFFFh
Prefetchable Memory Range Passed to Secondary Bus : D8000000h..DBFFFFFFh
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
Correctable Error Detected
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 1
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 2.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 0000h
SSID : 0000h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 29, Device Function 0
Vendor 8086h Intel Corporation
Device 2658h 82801FB ICH6 USB UHCI Controller 1
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 1800h..1813h
System IRQ 11, INT# A

Bus 0 (PCI Express), Device Number 29, Device Function 1
Vendor 8086h Intel Corporation
Device 2659h 82801FB ICH6 USB UHCI Controller 2
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 1820h..1833h
System IRQ 11, INT# B

Bus 0 (PCI Express), Device Number 29, Device Function 2
Vendor 8086h Intel Corporation
Device 265Ah 82801FB ICH6 USB UHCI Controller 3
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 1840h..1853h
System IRQ 11, INT# C

Bus 0 (PCI Express), Device Number 29, Device Function 3
Vendor 8086h Intel Corporation
Device 265Bh 82801FB ICH6 USB UHCI Controller 4
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 1860h..1873h
System IRQ 10, INT# D

Bus 0 (PCI Express), Device Number 29, Device Function 7
Vendor 8086h Intel Corporation
Device 265Ch 82801FB ICH6 USB 2.0 EHCI Controller
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is a Memory Address (0-4GiB) : C0000000h..C0000093h
System IRQ 11, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
USB 2.0 EHCI Debug Port Capability

Bus 0 (PCI Express), Device Number 30, Device Function 0
Vendor 8086h Intel Corporation
Device 2448h 82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision D3h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI (Subtractive Decode)
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 6, Subordinate Bus number 7
Secondary Bus Command 0004h (ISA mapping)
Secondary Bus Status 2280h (Supports Back-To-Back Trans.,
Received Master Abort, Medium Timing)
Secondary Bus Latency D8h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : C8000000h..C80FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1179h
SSID : FF00h

Bus 0 (PCI Express), Device Number 30, Device Function 2
Vendor 8086h Intel Corporation
Device 266Eh 82801FB ICH6 AC'97 Audio Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is an I/O Port : 1C00h..1CFFh
Address 1 is an I/O Port : 1880h..18BFh
Address 2 is a Memory Address (0-4GiB) : C0000800h..C00009FFh
Address 3 is a Memory Address (0-4GiB) : C0000400h..C00004FFh
System IRQ 10, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently enabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 30, Device Function 3
Vendor 8086h Intel Corporation
Device 266Dh 82801FB ICH6 AC'97 Modem Controller
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Simple Communication, type Hayes Compatible Modem
Subsystem ID 00011179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is an I/O Port : 2400h..24FFh
Address 1 is an I/O Port : 2000h..207Fh
System IRQ 11, INT# B
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently enabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 31, Device Function 0
Vendor 8086h Intel Corporation
Device 2641h 82801FBM ICH6M LPC Interface Bridge
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0200h (Medium Timing)
Revision 03h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems

Bus 0 (PCI Express), Device Number 31, Device Function 2
Vendor 8086h Intel Corporation
Device 2653h 82801FBM ICH6M SATA Controller
Command 0005h (I/O Access, BusMaster)
Status 02B8h (Signalled Interrupt, Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is at I/O Port 01F0h and IRQ 14
Secondary Channel is at I/O Port 0170h and IRQ 15
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is an I/O Port : 0000h (unconfigured)
Address 1 is an I/O Port : 0000h (unconfigured)
Address 2 is an I/O Port : 0000h (unconfigured)
Address 3 is an I/O Port : 0000h (unconfigured)
Address 4 is an I/O Port : 18F0h..18F7h
System IRQ (disabled), INT# B
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 31, Device Function 3
Vendor 8086h Intel Corporation
Device 266Ah 82801FB ICH6 SMBus Controller
Command 0001h (I/O Access)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 20A0h..20BFh
System IRQ 11, INT# B

Bus 1 (AGP), Device Number 0, Device Function 0
Vendor 1002h ATI Technologies Inc
Device 5462h Unknown
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 00h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Display, type VGA
Subsystem ID FF051179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is a Memory Address (0-4GiB, Prefetchable) : D0000000h..D7FFFFFFh
Address 1 is an I/O Port : 3000h..30FFh
Address 2 is a Memory Address (0-4GiB) : C0100000h..C010FFFFh
System IRQ 10, INT# A
Expansion ROM of 128 KiB decoded by this card, currently disabled
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
PCI Express Capability, Version 1
Device/Port Type :
PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Fatal
Device Status :
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x16
Link Port Number : 0
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x16
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses

Bus 2 (PCI Express), Device Number 0, Device Function 0
Vendor 11ABh Marvell Semiconductor (Was: Galileo Technology Ltd)
Device 4362h Yukon 88E8053 PCI-E Gigabit Ethernet Controller (Copper)
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 4010h (Has Capabilities List, Signalled System Error, Fast Timing)
Revision 15h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Network, type Ethernet
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is a Memory Address (64-bit) : C4000000h
Address 2 is an I/O Port : 4000h..40FFh
System IRQ 10, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
1900 mW D0 power consume
1900 mW D0 power dissipate
1200 mW D1 power consume
1200 mW D1 power dissipate
1200 mW D2 power consume
1200 mW D2 power dissipate
1200 mW D3 power consume
1200 mW D3 power dissipate
Vital Product Data Capability
Identifier Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
Part Number Yukon 88E8053
EC Level (Version) Rev. 1.9
Manufacturer ID Marvell
Serial Number AbCdEfGA8763A
Extended Capability 01h 10h CCh 03h
Checksum/End 2Eh 10*00h
Remaining RW Area 121*00h
End Tag
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
Legacy PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Non-Fatal
Device Status :
Correctable Error Detected
Non-Fatal Error Detected
Unsupported Request Detected
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1

Bus 6 (PCI), Device Number 2, Device Function 0
Vendor 8086h Intel Corporation
Device 4220h PRO/Wireless 2200BG Network Connection
Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 05h, Header Type 00h, Bus Latency Timer 20h
Minimum Bus Grant 03h, Maximum Bus Latency 18h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Network, type Other
Subsystem ID 27418086h PRO/Wireless 2200BG Network Connection
Subsystem Vendor 8086h Intel Corporation
Address 0 is a Memory Address (0-4GiB) : C8006000h..C8006FFFh
System IRQ 11, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
1900 mW D0 power consume
1900 mW D0 power dissipate
1900 mW D1 power consume
1900 mW D1 power dissipate
1900 mW D2 power consume
1900 mW D2 power dissipate
100 mW D3 power consume
100 mW D3 power dissipate
0 mW common logic power consume

Bus 6 (PCI), Device Number 4, Device Function 0
Vendor 104Ch Texas Instruments (TI)
Device 8031h PCIxx21/x515 Cardbus Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 00h, Header Type 82h, Bus Latency Timer 40h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to Cardbus
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
System IRQ 10, INT# A
CardBus Bridge Information:
PCI Bus Number 6, CardBus Bus Number 7, Subordinate Bus number 7
CardBus Latency 24h
Secondary Bus Command 0344h (ISA mapping, bus is in RESET,
ints routed by PCI)
Secondary Bus Status 0200h (Medium Timing)
Socket/ExCa Base Memory Address : C8007000h..C8007FFFh
Memory Range 0 : None
Memory Range 1 : None
I/O Port Range 0 : None
I/O Port Range 1 : None
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 6 (PCI), Device Number 4, Device Function 2
Vendor 104Ch Texas Instruments (TI)
Device 8032h OHCI Compliant IEEE-1394 FireWire Controller
Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 00h, Header Type 80h, Bus Latency Timer 20h
Minimum Bus Grant 02h, Maximum Bus Latency 04h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Serial, type OHCI FireWire
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is a Memory Address (0-4GiB) : C8008000h..C80087FFh
Address 1 is a Memory Address (0-4GiB) : C8000000h..C8003FFFh
System IRQ 11, INT# C
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 6 (PCI), Device Number 4, Device Function 3
Vendor 104Ch Texas Instruments (TI)
Device 8033h PCIxx11/21 Integrated FlashMedia Controller
Command 0006h (Memory Access, BusMaster)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 00h, Header Type 80h, Bus Latency Timer 39h
Minimum Bus Grant 07h, Maximum Bus Latency 04h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Storage, type Other
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is a Memory Address (0-4GiB) : C8004000h..C8005FFFh
System IRQ 10, INT# B
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 6 (PCI), Device Number 4, Device Function 4
Vendor 104Ch Texas Instruments (TI)
Device 8034h SDA Standard Compliant SD Host Controller
Command 0006h (Memory Access, BusMaster)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 00h, Header Type 80h, Bus Latency Timer 39h
Minimum Bus Grant 07h, Maximum Bus Latency 04h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class System, type SD Host Controller (Without DMA)
Subsystem ID FF001179h Unknown
Subsystem Vendor 1179h Toshiba America Information Systems
Address 0 is a Memory Address (0-4GiB) : C8009000h..C80090FFh
Address 1 is a Memory Address (0-4GiB) : C8008C00h..C8008CFFh
Address 2 is a Memory Address (0-4GiB) : C8008800h..C80088FFh
System IRQ 10, INT# D
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

ROM PCI IRQ routing table Tests....
ROM IRQ routing table found at F000h:DF10h
Table Version 1.0 - OK
Table size 0 bytes - Invalid Size!
IRQ's dedicated to PCI : None
The ROM PCI IRQ routing table appears to be faulty!!

IRQ Summary: IRQs 10,11,14,15 are used by PCI devices
Shared IRQs: IRQ 10 is shared by 9 PCI Devices
IRQ 11 is shared by 8 PCI Devices

User avatar
Papa Karlo
Posts: 36
Joined: Tue Jun 28, 2005 16:52

Postby Papa Karlo » Fri May 19, 2006 01:39

You should have _TMP in ACPI tree:

Code: Select all

    Status = AcpiEvaluateObject(TermoObjHandle[0],"_TMP",NULL,&Results);
       if ( Status == AE_OK )
       {
#if  defined(IBMVAC3)
         CurTemp = Object[0].Integer.Value.ulLo;
//         printf("   Current temperature: %d C ",(Object[0].Integer.Value.ulLo - 2732)/10 );
#else
         CurTemp = Object[0].Integer.Value;
//         printf("   Current temperature: %d C ",(Object[0].Integer.Value - 2732)/10 );
#endif
//         printf("( %d K * 10)\n",CurTemp );
         ACPITemp[0] = (CurTemp- 2732)/10. ;
      }

Spawn
Posts: 8
Joined: Mon Jun 19, 2006 09:53

Postby Spawn » Mon Jun 19, 2006 10:13

I get the same result here. I don't have _TMP, I have _TZ_ as well as TMP1 through TMP9. The sample Thermal.exe says:

Show Thermal
Thermal zone "_TZ_"
Status 0x0 0 - No error


Return to “ACPI for eComStation”

Who is online

Users browsing this forum: No registered users and 1 guest